Broadcast Software for Windows®

 

Emergency Alert System Software  

EASSentry.  Use your computer to log EAS Alerts from an EAS decoder and forward alerts to an email recipient.

EASAnywhere for the Sage Endec®.  Use your computer for remote control of your Sage Endec®.  May be used as a serial-to-serial connection locally or by telephone by connecting a modem to the Sage Endec.  Get your EAS Log from your remote transmitter site.   

Software for XDS Receiver

XDSControl will switch ports and pids based upon user selected schedule.  Connects via TCP/IP.  Also has Monitor and Command interface and ability to log Eb/No and receiver voltages and temperature.

SatStoreXDS will switch the ports and pids on the XDS receiver and record two channels of audio (you must have two sound cards) based upon user selected schedule. Connects via TCP/IP.  Also has Monitor and Command interface and ability to log Eb/No and receiver voltages and temperature.

 

Software for the Wegener Unity 4K® receiver

Unity Control is designed to control one or two Unity 4K® satellite receivers. 

Sat Store is a "time-shift" program which records programs from a source and plays them back at a later time.  In addition, it can be connected to the Unity 4K® to switch sources.

SatStoreTwo is an "upgraded" version of SatStore which allows recording of two programs simultaneously on computers equipped with two sound cards.

 

Software for the StarGuide® Digital Receiver

StarGuideControl is  designed to control one or two StarGuide® digital satellite receivers. 

AMBOS AMR 100

AMRMonitor "polls" the AMR 100 at user selectable intervals to check EbNo.  Will email warning below user selectable value

AmbosFileRemover removes "expired" MP2 files that have been transferred from the AMR100

 

AudioLogger

AudioLogger is a program which records or "logs" any audio which is connected to a computer's sound card.  The "VOX" (voice-operated start/stop)  feature enables AudioLogger to be used as a "skimmer".  News departments can connect a scanner and record police and fire calls.  Programming can connect to control room mikes to record "air checks."

PlayOnTime

PlayOnTime is a program which plays back a user selected audio file at a user determined time.  Multiple files and times may be set up.  Files may be .wav, .mp2, or .mp3.  +5 volts is available at Pin 2 of the Parallel port to indicate play mode or may be used to switch an audio circuit.   Download Now.

 

Silence Sensor

SilenceSensor.  Use your computer sound card to monitor an audio source and on silence send a page or email or text message to your cell phone.  User adjustable audio threshold and silence delay. 

SSPlus.  Use your computer sound card to monitor an audio source and on silence send a page. Plus play sound files from the computer until the audio source returns.

TimeSync

TimeSync is a routine to reset the computer time to HH:54:30 whenever a closure is present on the pins 15 and 18 of the parallel port.  This program is free.

 

WinWave

WinWave has been designed to be a simple yet powerful tool for live recording.  Sample rates and Mode (mono/stereo) are user selectable as well as the location where the wave files are stored.

WinWave export feature permits the user to "export" a file to another location and convert the file to a different format or sample rate.  Or just playback from the same computer.  Playback may be started by mouse or user supplied remote button connected via the parallel port.  Recording may be started manually, or by automatically starting when sound is present, or by an external closure connected via the parallel port.